Autor Tema: GBCAT - Domaći CAT program za Yaesu FT-857D i FT-8xx seriju  (Posjeta: 5582 )

0 Članova i 1 Gost pregledava ovu temu.

Offline 9A2GB

  • Newbie
  • *
  • Postova: 15
    • Profil
    • 9A2GB Home Page
Odg: GBCAT - Domaći CAT program za Yaesu FT-857D i FT-8xx seriju
« Odgovori #15 : 20. Prosinac. 2012, 12:16:35 »
Cijenjeni kolege radioamateri,

Novi GBCAT FAQ 3 (često postavljana pitanja i odgovori), te pregled novih mogućnosti GBCAT v0.9b2, možete preuzeti na: http://www.9a2gb.net/gbcat-faq-3/

Svi zainteresirani, koji žele testirati GBCAT - Computer Aided Transceiver, mogu me kontaktirati na: emu.9a2gb@gmail.com

Srdačan pozdrav i sve najbolje za predstojeće blagdane!

Ivan
9A2GB

Offline 9A2GB

  • Newbie
  • *
  • Postova: 15
    • Profil
    • 9A2GB Home Page
Odg: GBCAT - Domaći CAT program za Yaesu FT-857D i FT-8xx seriju
« Odgovori #16 : 03. Kolovoz. 2013, 11:34:39 »
Cijenjeni kolege radioamateri,

Nova inačica GBCAT - Computer Aided Transceiver dostupna je za sve one koji žele testirati GBCAT prije prve javne objave (Beta Test).

Do sada podržani radioamaterski uređaji:

- Yaesu FT-857/857D
- Yaesu FT-817/817ND
- Yaesu FT897D
- Icom IC-706MKIIG
- Kenwood TS-2000 (from v0.9b6)

Pregled novih mogućnosti, GBCAT v0.9b6:
Dodana podrška za Kenwood TS-2000 transceiver.

Do sada podržane Kenwood TS-2000 kontrole i ostale mogućnosti:
- Upravljanje uređajem preko COM/USB porta, pomoću dva neovisna COM pogona
- Daljinsko upravljanje preko TCP/IP mreže
- Kenwood TS-2000 detekcija na startu, i uključenje uređaja
- VFO Reset, Master Reset
- Čitanje, uređivanje i upis memorijskih kanala na TS-2000 (3×100 mem. kanala)
- Istovremeni prikaz 9-segmentne frekvencije za VFO-A, VFO-B, SUB-Receiver
- Mode, Band, Shift, Repator Offset, selektor za memorijske kanale
- LOCK, PTT, NR, NB, BC, ARO, ASC, CTRL, AT, A1/A2 dugmad-kontrole
- VFO/M, M2V, MEMW, SPLIT, A=B, A=C, SWAP dugmad-kontrole
- PWR, MTR.F, AN, AUTO, CW.AT, FINE, F/C/M, PCT dugmad-kontrole
- CTCSS/DCS/Tone kontrole
- CW-IF Shift, DRU-3A kontrole
- „Power & Analog Gain & Step“ klizne kontrole: HF Power, Carrier Level, AM Step, FM Step, SSB Step
- „PTT & CW Controls“ klizne kontrole: CW Speed
- „DSP Controls“ klizne kontrole: DSP HiCut, DSP LoCut, DSP RX BW, DSP TX BW, DSP RX EQ, DSP TX EQ
- „Noise & Display Controls“ klizne kontrole: NR Level, NB Level, Manual BC, Auto Notch, Contrast, Intensity

U idućim GBCAT inačicama biti će nastavljena implementacija svih CAT kontrola za Kenwood TS-2000.

Svi zainteresirani radioamateri koji žele testirati GBCAT kao Beta Testeri, mogu me kontaktirati mailom na: emu.9a2gb@gmail.com

Više o GBCAT na: www.9a2gb.net

73, Ivan
9A2GB

Offline 9A2GB

  • Newbie
  • *
  • Postova: 15
    • Profil
    • 9A2GB Home Page
Odg: GBCAT - Domaći CAT program za Yaesu, Icom, Kenwood uredjaje
« Odgovori #17 : 24. Prosinac. 2013, 10:56:17 »
GBCAT v1.0 – prva javna objava

Cijenjeni kolege radioamateri, napokon, GBCAT – Computer Aided Transceiver v1.0, nas novi program za upravljanje radio uredjajima, danas je po prvi puta javno objavljen i postavljen za preuzimanje i slobodno koristenje u radioamaterske svrhe. GBCAT omogucuje upravljanje radio uredjajima putem COM/USB porta na vasem PC racunalu, uz mogucnost koristenja mreznog upravljanja i prijenosa audio signala (2-way QSO) preko racunalne mreze.

GBCAT instalacijski paket takodjer sadrzi Remote Desktop Connection, IPCOM Server/COM2IP Redirector, i Audio Server/Client.

Hardverski zahtjevi: 
Najmanje PC sa jednojezgrenim procesorom, (preporuceno CPU clock od 1.7 GHz ili visi), 2 MB RAM, COM ili USB port (tada ce biti potreban USB na COM adapter), TCP/IP network kartica (za mrezni rad), i neki od podrzanih radio uredjaja, spojen odgovarajucim kablom/suceljem na COM/USB port. Neka vas ovaj hardverski zahtjev ne obeshrabri, GBCAT je testiran i na prastarom DELL notebooku, sa jednojezgrenim procesorom P-III/1200 i samo 512 MB RAM, i radi odlicno.

Softverski zahtjevi:
Jedan od nabrojenih operativnih sustava: Windows XP(tm), Windows 7(tm), Windows 8(tm). Takodjer, zahtijeva se instaliran Microsoft(tm) .NET Framework v4.0 Client Profile.

Podrzani radio uredjaji: Kenwood TS-2000, Yaesu FT-857/857D, Yaesu FT-817/817ND, Yaesu FT897D, Icom IC-706MKIIG.

Razvoj GBCAT-a traje vec dvije godine, i oduzeo mi je sve slobodno vrijeme. Bez obzira na to, GBCAT je besplatan, i ostati ce besplatan. Za koristenje je potrebna samo jednostavna registracija (Ime i pozivna oznaka), cime cete podrzati daljni razvoj. 

Zelio bih zahvaliti svim clanovima GBCAT Beta Test tima, koji su testirali GBCAT u Beta fazama razvoja, daleko od ociju javnosti, pomazuci mi da GBCAT izgleda i radi kao sada, u inacici v1.0: Mike N7NMS, Kevin KG0MN, Jim K5LAD (also lecturer/proofreader), Sandor KG4FET, Brian KB3ORS, John G4IAL, Ian M1EHI, Drasko 9A4HP, Dzenan E77DD, Mladen 9A6DAC, Oto 9A4OP, Zlatko 9A6SJZ.

GBCAT v1.0 mozete besplatno preuzeti ovdje:
http://www.9a2gb.net/download-gbcat-computer-aided-transceiver/

GBCAT podrska: http://www.9a2gb.net/forum/

Svim radioamaterima kao ljudima dobre volje, zelim blagoslovljen Bozic i sretnu novu 2014. godinu.

Ivan
9A2GB
www.9a2gb.net

---
GBCAT v1.0 – The first Public Release!

Finally, GBCAT – Computer Aided Transceiver v1.0, a new Windows software for controlling amateur radio devices through a COM/USB port or through a TCP/IP network, with the ability to transfer a 2-way audio signal over a TCP/IP network, is born!

The GBCAT installation package also contains: Remote Desktop Connection, IPCOM Server/COM2IP Redirector, and Audio Server/Client.

Hardware requirements:
At least a single core processor PC, (recommended CPU clock is 1.7 GHz or higher), 2 MB RAM, a COM or USB port (USB to COM adapter if required), TCP/IP network card (for wired or wireless operation), and any of the supported radios connected to the COM port by a suitable cable/adapter.

Software requirements:
Any of the following operating systems: Windows XP(tm), Windows 7(tm), Windows 8(tm). Installed Microsoft(tm) .NET Framework v4.0 Client Profile.

Supported radios: Kenwood TS-2000, Yaesu FT-857/857D, Yaesu FT-817/817ND, Yaesu FT897D, Icom IC-706MKIIG.

GBCAT development has been ongoing for two years, and takes all of the author’s free time; nevertheless, GBCAT is free of charge, only the simple registration (Name and Call) is required.

I want to thank the all members of the GBCAT Beta Test team, who were testing GBCAT in the Beta phases, helping me to achieve GBCAT looks and works the way it does in version v1.0: Mike N7NMS, Kevin KG0MN, Jim K5LAD (also lecturer/proofreader), Sandor KG4FET, Brian KB3ORS, John G4IAL, Ian M1EHI, Drasko 9A4HP, Dzenan E77DD, Mladen 9A6DAC, Oto 9A4OP, Zlatko 9A6SJZ.

You may download GBCAT v1.0 free of charge HERE:
http://www.9a2gb.net/download-gbcat-computer-aided-transceiver/

GBCAT Support: http://www.9a2gb.net/forum/

Merry Christmas and all the best in the New Year 2014!

Ivan
9A2GB
www.9a2gb.net